---
title: "EPS Android Component"
description: "Add EPS to your Components integration."
url: "https://docs.adyen.com/payment-methods/eps/android-component"
source_url: "https://docs.adyen.com/payment-methods/eps/android-component.md"
canonical: "https://docs.adyen.com/payment-methods/eps/android-component"
last_modified: "2026-05-24T12:54:31+02:00"
language: "en"
---

# EPS Android Component

Add EPS to your Components integration.

[View source](/payment-methods/eps/android-component.md)

You can add EPS to your existing integration. The following instructions show only what you must add to your integration specifically for EPS.

If an instruction on this page corresponds with a step in the main integration guide, it includes a link to corresponding step of the main integration guide.

The additions you must make depends on the [server-side flow](/online-payments/build-your-integration) that your integration uses:

## Sessions flow Component

### Before-You-Begin

## Requirements

| Requirement           | Description                                                                                                                                                                                                                  |   |
| --------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | - |
| **Integration type**  | Make sure that you have an existing Sessions flow [Android Components integration](/online-payments/build-your-integration/sessions-flow?platform=Android).                                                                  |   |
| **Checkout API**      | Make sure that you use Checkout API v68 or later.                                                                                                                                                                            |   |
| **Redirect handling** | Make sure that your existing integration is set up to [handle the redirect](/online-payments/build-your-integration/sessions-flow?platform=Android\&integration=Components#handle-the-redirect). `action.type`: **redirect** |   |
| **Setup steps**       | Before you begin, [add EPS in your Customer Area](/payment-methods/add-payment-methods).                                                                                                                                     |   |

### Add-Parameters-Sessions-Request

## Add additional parameters to your /sessions request

You do not need to add any parameters when you [create a payment session](/online-payments/build-your-integration/sessions-flow?platform=Android\&integration=Components#create-a-payment-session).

### Import-Component

## Import the Component for EPS

To [import the library](/online-payments/build-your-integration/sessions-flow?platform=Android\&integration=Components#import) and include the module for EPS.

### Tab: With Jetpack Compose

**Import the module with Compose**

```java
implementation "com.adyen.checkout:eps:YOUR_VERSION"
implementation "com.adyen.checkout:components-compose:YOUR_VERSION"
```

### Tab: Without Jetpack Compose

**Import the module without Compose**

```java
implementation "com.adyen.checkout:eps:YOUR_VERSION"
```

### Add-Configuration

## Add additional configuration for EPS

[Add a configuration object](/online-payments/build-your-integration/sessions-flow?platform=Android\&integration=Components#3-optional-add-a-configuration-object) with the following parameters:

| Parameter              | Required | Description                                                          |
| ---------------------- | -------- | -------------------------------------------------------------------- |
| setSubmitButtonVisible |          | Set to **false** to hide the submit button. The default is **true**. |

**Add a configuration object**

```kotlin
 { 
    .setSubmitButtonVisible(value) 
    
}
```

### Launch-And-Show

## Launch and show the Component for EPS

To [create the Component](/online-payments/build-your-integration/sessions-flow?platform=Android\&integration=Components#launch-and-show) for EPS, use the `EPSComponent` class.

### Tab: With Jetpack Compose

**Launch and show the Component**

```kotlin
import com.adyen.checkout.components.compose.get

// Get the payment method.
val paymentMethod = checkoutSession.getPaymentMethod(PaymentMethodTypes.SCHEME)

@Composable
private fun ComposableEPSComponent() {
  // Keep a reference to this Component in case you need to access it later.
  val epsComponent = EPSComponent.PROVIDER.get(
      checkoutSession = checkoutSession,
      paymentMethod = paymentMethod,
      configuration = checkoutConfiguration, 
      componentCallback = callback,
      // This key is required to ensure a new Component gets created for each different screen or payment session.
      // Generate a new value for this key every time you need to reset the Component.
      key = "YOUR_UNIQUE_KEY_FOR_THIS_COMPONENT",
  )

  // This is your composable, a wrapper around our xml view.
  AdyenComponent(
     component = epsComponent,
     modifier = YOUR_MODIFIER,
  )
}
```

### Tab: Without Jetpack Compose

```kotlin
// Get the payment method.
val paymentMethod = checkoutSession.getPaymentMethod(PaymentMethodTypes.SCHEME)

val epsComponent = EPSComponent.PROVIDER.get(
    activity, // Your activity or fragment.
    checkoutSession,
    paymentMethod,
    checkoutConfiguration, 
    componentCallback
)

// Attach the Component to your view.
binding.epsView.attach(epsComponent, activity) // Your activity or fragment.
```

### Recurring

## Recurring payments

We support recurring transactions for EPS through [SEPA Direct Debit](/payment-methods/sepa-direct-debit). To make recurring payments, you need to:

1. [Create a shopper token](#create-a-token).
2. [Use the token to make future payments for the shopper](#make-payment-with-token).

### Create a token

We strongly recommend that you request explicit permission from the shopper if you intend to make recurring SEPA payments. Being transparent about the payment schedule and the charged amount reduces the risk of [chargebacks](/payment-methods/sepa-direct-debit/api-only#chargebacks).

To create a token, include in your [/payments](https://docs.adyen.com/api-explorer/Checkout/latest/post/payments) request:

* `storePaymentMethod`: **true**
* [shopperReference](https://docs.adyen.com/api-explorer/Checkout/latest/post/payments#request-shopperReference): Your unique identifier for the shopper (minimum length three characters).

When the payment has been settled, you receive a [recurring.token.created](https://docs.adyen.com/api-explorer/Tokenization-webhooks/latest/post/recurring.token.created) [webhook](/development-resources/webhooks) containing:

* `type`: **recurring.token.created**
* `shopperReference`: your unique identifier for the shopper.
* `eventId`: the `pspReference` of the initial payment.
* `storedPaymentMethodId`: the token that you need to make recurring payments for this shopper.

Make sure that your server is able to receive the [Recurring tokens life cycle events](/development-resources/webhooks/webhook-types/#other-webhooks) webhook. You can [set up this webhook in your Customer Area](/development-resources/webhooks/#set-up-webhooks-in-your-customer-area).

### Make a payment with a token

To make a payment with the token, include in your [/payments](https://docs.adyen.com/api-explorer/Checkout/latest/post/payments) request:

* `paymentMethod.storedPaymentMethodId`: The `storedPaymentMethodId` from the [recurring.token.created](https://docs.adyen.com/api-explorer/Tokenization-webhooks/latest/post/recurring.token.created) webhook.

You can also get this value using the [/listRecurringDetails](https://docs.adyen.com/api-explorer/Recurring/latest/post/listRecurringDetails) endpoint.

* `shopperReference`: The unique shopper identifier that you specified when creating the token (minimum length three characters).
* `shopperInteraction`: **ContAuth**.
* `recurringProcessingModel`: **Subscription** or **UnscheduledCardOnFile**.

For more information about the `shopperInteraction` and `recurringProcessingModel` fields, refer to [Tokenization](/online-payments/tokenization/).

## Test and go live

Check the status of EPS test payments in your [Customer Area](https://ca-test.adyen.com/) > **Transactions** > **Payments**.

Before you can accept live EPS payments, you need to [submit a request for EPS](/payment-methods/add-payment-methods) in your [live Customer Area](https://ca-live.adyen.com/).

## Advanced flow Component

## Requirements

| Requirement          | Description                                                                                                                                                                                                                       |   |
| -------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | - |
| **Integration type** | Make sure that you have an existing Advanced flow [Android Components integration](/online-payments/build-your-integration/advanced-flow?platform=Android).                                                                       |   |
| **Action handling**  | Make sure that your existing integration is set up to [handle the additional action](/online-payments/build-your-integration/advanced-flow/?platform=Android\&integration=Components#additional-action). `action.type`: redirect. |   |
| **Setup steps**      | Before you begin, [add EPS in your Customer Area](/payment-methods/add-payment-methods).                                                                                                                                          |   |

### Import

## Import the Component for EPS

To [import the library](/online-payments/build-your-integration/advanced-flow/?platform=Android\&integration=Components#import) and include the module for EPS.

### Tab: With Jetpack Compose

**Import the module with Compose**

```java
implementation "com.adyen.checkout:eps:YOUR_VERSION"
implementation "com.adyen.checkout:components-compose:YOUR_VERSION"
```

### Tab: Without Jetpack Compose

**Import the module without Compose**

```java
implementation "com.adyen.checkout:eps:YOUR_VERSION"
```

### Add Configuration

## Add additional configuration for EPS

[Add a configuration object](/online-payments/build-your-integration/advanced-flow/?platform=Android\&integration=Components#3-optional-add-a-configuration-object) with the following parameters:

| Parameter              | Required | Description                                                          |
| ---------------------- | -------- | -------------------------------------------------------------------- |
| setSubmitButtonVisible |          | Set to **false** to hide the submit button. The default is **true**. |

**Add a configuration object**

```kotlin
 { 
    .setSubmitButtonVisible(value) 
    
}
```

### Launch And Show

## Launch and show the Component for EPS

To [create the Component](/online-payments/build-your-integration/advanced-flow/?platform=Android\&integration=Components#launch-and-show) for EPS, use the `EPSComponent` class.

### Tab: With Jetpack Compose

**Launch and show the Component**

```kotlin
import com.adyen.checkout.components.compose.get

// Create the payment method object from the /paymentMethods response.
val paymentMethod = paymentMethodsApiResponse?.paymentMethods.orEmpty().firstOrNull {
  it.type == PaymentMethodTypes.SCHEME
}

@Composable
private fun ComposableEPSComponent() {
    // Keep a reference to this Component in case you need to access it later.
    val epsComponent = EPSComponent.PROVIDER.get(
        paymentMethod = paymentMethod,
        configuration = checkoutConfiguration,
        componentCallback = callback,
        // This key is required to ensure a new Component gets created for each different screen or payment session.
        // Generate a new value for this key every time you need to reset the Component.
        key = "UNIQUE_KEY_PER_COMPONENT",
    )

    // This is your composable, a wrapper around our xml view.
    AdyenComponent(
        component = epsComponent,
        modifier = YOUR_MODIFIER,
    )
}
```

### Tab: Without Jetpack Compose

```kotlin
// Create the payment method object from the /paymentMethods response.
val paymentMethod = paymentMethodsApiResponse?.paymentMethods.orEmpty().firstOrNull {
    it.type == PaymentMethodTypes.SCHEME
}

val epsComponent = EPSComponent.PROVIDER.get(
    activity, // Your activity or fragment.
    paymentMethod,
    checkoutConfiguration,
    componentCallback,
)

//Attach the Component to your view.
binding.epsView.attach(epsComponent, activity) // Your activity or fragment.
```

### Add Parameters Payments Request

## Add additional parameters to your /payments request

You do not need to add any parameters to the [/payments](https://docs.adyen.com/api-explorer/Checkout/latest/post/payments) request when you [make a payment](/online-payments/build-your-integration/advanced-flow/?platform=Android\&integration=Components#make-a-payment).

### Recurring

## Recurring payments

We support recurring transactions for EPS through [SEPA Direct Debit](/payment-methods/sepa-direct-debit). To make recurring payments, you need to:

1. [Create a shopper token](#create-a-token).
2. [Use the token to make future payments for the shopper](#make-payment-with-token).

### Create a token

We strongly recommend that you request explicit permission from the shopper if you intend to make recurring SEPA payments. Being transparent about the payment schedule and the charged amount reduces the risk of [chargebacks](/payment-methods/sepa-direct-debit/api-only#chargebacks).

To create a token, include in your [/payments](https://docs.adyen.com/api-explorer/Checkout/latest/post/payments) request:

* `storePaymentMethod`: **true**
* [shopperReference](https://docs.adyen.com/api-explorer/Checkout/latest/post/payments#request-shopperReference): Your unique identifier for the shopper (minimum length three characters).

When the payment has been settled, you receive a [recurring.token.created](https://docs.adyen.com/api-explorer/Tokenization-webhooks/latest/post/recurring.token.created) [webhook](/development-resources/webhooks) containing:

* `type`: **recurring.token.created**
* `shopperReference`: your unique identifier for the shopper.
* `eventId`: the `pspReference` of the initial payment.
* `storedPaymentMethodId`: the token that you need to make recurring payments for this shopper.

Make sure that your server is able to receive the [Recurring tokens life cycle events](/development-resources/webhooks/webhook-types/#other-webhooks) webhook. You can [set up this webhook in your Customer Area](/development-resources/webhooks/#set-up-webhooks-in-your-customer-area).

### Make a payment with a token

To make a payment with the token, include in your [/payments](https://docs.adyen.com/api-explorer/Checkout/latest/post/payments) request:

* `paymentMethod.storedPaymentMethodId`: The `storedPaymentMethodId` from the [recurring.token.created](https://docs.adyen.com/api-explorer/Tokenization-webhooks/latest/post/recurring.token.created) webhook.

You can also get this value using the [/listRecurringDetails](https://docs.adyen.com/api-explorer/Recurring/latest/post/listRecurringDetails) endpoint.

* `shopperReference`: The unique shopper identifier that you specified when creating the token (minimum length three characters).
* `shopperInteraction`: **ContAuth**.
* `recurringProcessingModel`: **Subscription** or **UnscheduledCardOnFile**.

For more information about the `shopperInteraction` and `recurringProcessingModel` fields, refer to [Tokenization](/online-payments/tokenization/).

## Test and go live

Check the status of EPS test payments in your [Customer Area](https://ca-test.adyen.com/) > **Transactions** > **Payments**.

Before you can accept live EPS payments, you need to [submit a request for EPS](/payment-methods/add-payment-methods) in your [live Customer Area](https://ca-live.adyen.com/).