--- title: "Use a standalone terminal" description: "Make payments and other transactions from a standalone terminal." url: "https://docs.adyen.com/point-of-sale/standalone/standalone-use" source_url: "https://docs.adyen.com/point-of-sale/standalone/standalone-use.md" canonical: "https://docs.adyen.com/point-of-sale/standalone/standalone-use" last_modified: "2025-05-21T16:17:00+02:00" language: "en" --- # Use a standalone terminal Make payments and other transactions from a standalone terminal. [View source](/point-of-sale/standalone/standalone-use.md) Print this page This page gives instructions for the following operations using a standalone payment terminal: * Make payments, including QR code payments, MKE, MOTO, cashback, and tipping. * Cancel a transaction while it is happening. * Issue a referenced or unreferenced refund. * Use the Totals report. * Reprint a receipt. ## Requirements Before you begin, take into account the following requirements, limitations, and preparations. | Requirement | Description | | -------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | **Integration type** | [Standalone](/point-of-sale/standalone/). | | **Hardware** | A [standalone payment terminal](/point-of-sale/what-we-support/select-your-terminals/?integration%5B0%5D=standalone). | | **Limitations** | Note the following:- Gift cards and other stored value cards can currently only be used on non-Android standalone terminals. | | **Setup steps** | Before you begin, ask our [Support Team](https://ca-test.adyen.com/ca/ca/contactUs/support.shtml?form=other) to enable the features that you want to use on your standalone terminal:- Tipping - Referenced refunds - Gift cards and other stored value cards - MOTO payments | ## Make a payment After the terminal has been [set up](/point-of-sale/standalone/standalone-build/set-up-standalone) for standalone use, you can start a payment by entering the value of the transaction on the terminal, then handing it to the shopper to complete the transaction. To make a payment with a *credit or debit card or NFC wallet* from a standalone terminal: 1. Select **Payment**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure), select **Start** on the terminal display, or select the **Confirm** key **![](/images/0/d/2/b/0/0d2b0874013612da7723bf57651aed7626a75836-confirm2x.png)** on the keypad. 2. Enter the transaction value and confirm to continue. 3. Hand the terminal to the shopper, so they can complete the payment. 4. The shopper presents their card or their device with the NFC chip to the terminal and follows the instructions on the terminal to complete the payment. If the successful, the terminal shows the transaction is approved. The terminal also prints a receipt for the transaction. You can find the details of the payment in your [Customer Area](https://ca-test.adyen.com/), under **Transactions** > **Payments**. ### QR code payments Standalone terminals also support wallets like Alipay and WeChat Pay. For these payment methods, a QR code is shown on the terminal display. The shopper uses the app on their phone to scan this QR code and complete the payment. To make a QR code payment: 1. Select **Payment**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure), select **Start** on the terminal display, or select the **Confirm** key **![](/images/0/d/2/b/0/0d2b0874013612da7723bf57651aed7626a75836-confirm2x.png)** on the keypad. 2. Enter the transaction value and confirm to continue. 3. On the terminal display, select **Wallets**, then select the shopper's payment method.\ A QR code is shown on the terminal display. 4. Hand the terminal to the shopper, so they can complete the payment. 5. The shopper scans the QR code on the terminal to complete the payment. If successful, the terminal shows the transaction is approved. The terminal also prints a receipt for the transaction. ### Manual Key Entry payment Manual Key Entry (MKE) involves manually typing the details from a shopper's card into the payment terminal. You can use this when the payment terminal fails to obtain the card details from the card's chip or magnetic stripe. To make an MKE payment: 1. Select **Transactions** > **New transaction**. 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select **Continue**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure): 1. Select **8** and then the **Confirm** key **![](/images/0/d/2/b/0/0d2b0874013612da7723bf57651aed7626a75836-confirm2x.png)** (on legacy models, it is **Confirm** and then **8**.). 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select the **Confirm** key. 3. Select **Manual key entry**. 4. Enter an amount and confirm to continue. 5. Follow the instructions on the display to enter the [PAN](/get-started-with-adyen/adyen-glossary/#card-number-pan) and the card expiry date. The transaction then follows the normal flow. ### MOTO payment A Mail Order/Telephone Order (MOTO) transaction is a [card-not-present transaction](/get-started-with-adyen/adyen-glossary/#card-not-present-cnp) where the shopper provides you with their order and payment details by regular mail (not email), fax, or telephone. Before you can make MOTO transactions, you need to [enable this feature](/point-of-sale/mail-and-telephone-order-moto). To make a MOTO payment: 1. Select **Transactions** > **New transaction**. 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select **Continue**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure): 1. Select **8** and then the **Confirm** key **![](/images/0/d/2/b/0/0d2b0874013612da7723bf57651aed7626a75836-confirm2x.png)** (on legacy models, it is **Confirm** and then **8**.). 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select the **Confirm** key. 3. Select **Moto payment**. 4. Enter an amount and confirm. 5. Follow the instructions on the display to enter the shopper's card number and CVC code. The terminal may also ask you to enter the shopper's postal code (zip code) and house number. The transaction then follows the normal flow. ### Cashback The cashback feature lets shoppers get cash in hand from their account when making a purchase. Issuing a cashback without a purchase, often called cashout, is currently not supported on standalone payment terminals. To issue a cashback: 1. Select **Transactions** > **New transaction**. 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select **Continue**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure): 1. Select **8** and then the **Confirm** key **![](/images/0/d/2/b/0/0d2b0874013612da7723bf57651aed7626a75836-confirm2x.png)** (on legacy models, it is **Confirm** and then **8**.). 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select the **Confirm** key. 3. Select **Cashback**. 4. Enter the purchase amount and confirm to continue. 5. Enter the cashback amount. 6. Follow the instructions on the display to enter the shopper's card number and CVC code. The transaction then follows the normal flow. ## Tipping If our [Support Team](https://ca-test.adyen.com/ca/ca/contactUs/support.shtml?form=other) has enabled tipping for your account, the terminal will prompt for a tip with every payment that you initiate. 1. [Start the payment](#make-a-payment) and enter the transaction value as usual.\ The terminal shows a message asking the shopper whether they want to add a tip. 2. Hand the terminal to the shopper, so they can select a tipping option, enter an amount, or decline giving a tip. 3. The transaction then follows the normal flow, and the shopper follows the instructions on the terminal to complete the payment. ## Cancel an in-progress payment Before a payment has finished processing you can try to cancel it: * Select the **Cancel** key **![](/images/3/b/6/5/7/3b657d104227ab25898170e9a0479e90f2e27867-cancel2x.png)** on the terminal keypad.\ Or *on an Android terminal*, select the **Cancel** key ![](/images/e/1/e/8/5/e1e85c48bc00c108363ec0bd41dba2fe9e84aa57-android-cancel.png) on the display. If your cancel attempt is successful, the terminal shows a **Cancelled** message on the display. If the cancel attempt failed (and the payment was approved), you will need to [issue a refund](#refund). ## Refund a payment There are two types of refund you can make from a standalone terminal: * [Referenced refunds](#referenced) are connected to the original purchase. * [Unreferenced refunds](#unreferenced) can be made to any card and for any amount. Referenced refunds offer the following advantages over unreferenced refunds: * Lower risk of return fraud: a payment cannot be refunded multiple times. * Lower risk of human error: store staff cannot enter the wrong refund amount on the terminal. * Support for QR code payment methods, such as Alipay and WeChat Pay, which do not allow unreferenced refunds. When a refund has been processed, it is deducted from your [in-process funds](https://help.adyen.com/knowledge/payments/refunds/what-funds-do-i-have-available-for-refunds) and will appear in your shopper's account within a few days. ### Make a referenced refund To make a referenced refund: 1. Select **Transactions** > **History**, enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select **Continue**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure), go to[Admin & Settings menu](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#open-admin-menu) and select **Transactions**. 2. Select the transaction you want to refund. 3. Select the action to void (refund) the transaction. The terminal prints a receipt for the refund. If successful, the refund is issued directly to the shopper's account. ### Make an unreferenced refund To make an unreferenced refund: 1. Select **Transactions** > **New transaction** 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode) and select **Continue**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure): 1. Select **8** and then the **Confirm** key **![](/images/0/d/2/b/0/0d2b0874013612da7723bf57651aed7626a75836-confirm2x.png)** (on legacy models, it is **Confirm** and then **8**.). 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode) and select the **Confirm** key. 3. Select **Refund** or **MOTO refund**. 4. If the terminal asks for a passcode, enter your 6-digit [Refunds passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode) and select the **Confirm** key or **Continue**. If you enter an incorrect passcode three times, you have to wait for 30 seconds before you try again. 5. Enter the value of the refund and confirm. 6. Complete the refund: * For a regular **Refund**, the shopper presents the card to the terminal and follows the instructions on the terminal to complete the refund. * For a **MOTO refund**, you manually enter the **Card number**, **Expiry date**, and **CVC**.\ The terminal shows a success screen. In case of a regular **Refund**, the terminal prints a receipt. You can find the details of refunds in your [Customer Area](https://ca-test.adyen.com/), under **History** > **Payments**. ## Use gift cards and other stored value cards Stored value cards are payment cards with a monetary value that is stored on the card itself instead of in a bank account. Examples are gift cards, mall cards, meal vouchers, and other prepaid cards. To use a stored value card on a standalone terminal: 1. Select **8** and then the **Confirm** key **![](/images/0/d/2/b/0/0d2b0874013612da7723bf57651aed7626a75836-confirm2x.png)** (on legacy models, it is **Confirm** and then **8**.). 2. Enter your [Transactions passcode](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin#get-passcode), and select the **Confirm** key. 3. Select **Gift card**. 4. Select the action you want to perform: * **Redeem**: remove the transaction amount from a gift card. * **Redeem via MKE**: use Manual key entry to remove transaction amount from a gift card. * **Activate**: activate a gift card before the shopper can use the card for payment. You can activate the card with and without and amount. * **Load**: add funds to a gift card. * **Balance inquiry**: check the funds remaining on the gift card. It is not possible to [cancel](#cancel) this action. * **Cashout**: take funds off the gift card and give this back to the shopper as cash. Standalone gift card payments only allow a full cash out of the gift card funds. 5. Follow the instructions on the display. The transaction then follows the normal flow of the chosen gift card action. ## View, print, and reset totals The terminal can generate a Totals report. This gives an overview of the total amounts for sales, refunds, gratuities (tips), and cancellations that the terminal processed since the last reset. By resetting the report, you can use this functionality to get day totals or shift totals. To obtain the Totals report: 1. Select **Transactions**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure), [open the Admin menu](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin). 2. Select **Totals**. 3. You can now: * View a Totals report for the period shown at the top of the report. * Print the Totals report. * Start a new reporting period by selecting the reset button ![](/user/pages/docs/03.point-of-sale/43.standalone/standalone-use/bttn-refresh.svg?decoding=auto\&fetchpriority=auto). * On a non-Android terminal that uses the old menu structure, select **Reset** > **Yes**. The totals from the previous period are no longer shown. You can now view and print the last known Totals report. ### Resetting automatically To automatically reset the Totals every day at a specific hour, contact our [Support Team](https://ca-test.adyen.com/ca/ca/contactUs/support.shtml?form=other). ## Reprint transaction receipt To print another copy of the shopper or merchant receipt for a specific transaction: 1. Select **Transactions** > **History**. * On *non-Android terminals* that use the [old menu structure](/point-of-sale/menu-access#old-menu-structure), open the [Admin & Settings menu](/point-of-sale/pos-troubleshooting/terminal-turns-on/admin-pin), and then select **Transactions**. 2. Select the transaction that you want to reprint a receipt for. 3. Select **Receipts** and then the receipt you want to print: **Shopper receipt** or **Merchant receipt**. 4. Select **Print**. 5. Select **Cancel** to go back to the point where you can select and print the other receipt, or select **Cancel** repeatedly until the menu closes. ## See also * [Terminal troubleshooting](/point-of-sale/pos-troubleshooting)