{"title":"Connect the e355 to your wireless network","category":"default","creationDate":1776961627,"content":"

Steps<\/h2>\n
    \n
  1. \n

    Press both\u00a0\"\"<\/strong> \u00a0and\u00a09<\/strong> to enter the Admin menu.<\/p>\n<\/li>\n

  2. \n

    Enter the PIN code for the Admin menu\u00a0to unlock the device.\u00a0If you do not know this code, see our POS Troubleshooting section<\/a>.<\/p>\n

  3. \n

    Press\u00a01.<\/strong> Network<\/strong>.\u00a0<\/p>\n<\/li>\n

  4. \n

    Press\u00a02.\u00a0Wi-Fi<\/strong>.<\/p>\n<\/li>\n

  5. \n

    Press\u00a02.\u00a0Networks<\/strong><\/p>\n<\/li>\n

  6. \n

    You can either scan for a network, or manually add it:<\/p>\n

      \n
    1. \n

      Press\u00a01. Scan<\/strong>\u00a0to scan for a network.<\/p>\n

      \n

      When scanning, the terminal shows the message \"Scanning network<\/strong>\", while it looks for a network.<\/p>\n<\/div><\/div>\n

        \n
      1. \n

        Choose the desired network and enter the wireless password.\u00a0<\/p>\n

        The terminal will connect to the network.<\/p>\n<\/li>\n

      2. \n

        The terminal sets the network as default automatically, and connects to it.<\/p>\n<\/li>\n

      3. \n

        Exit the network menu to begin boarding the device.<\/p>\n<\/li>\n<\/ol>\n<\/li>\n

      4. \n

        Or press\u00a02. Add<\/strong>\u00a0to manually add a network.<\/p>\n

          \n
        1. Enter the network name in the\u00a01. SSID<\/strong>\u00a0field and press\u00a0\"\"<\/strong>.<\/li>\n
        2. Press\u00a02<\/strong>\u00a0to select the authentication type (Auth<\/strong>).<\/li>\n
        3. Use the green left and right arrows on the screen to toggle between\u00a0WPA<\/strong>\u00a0and\u00a0WPA-2<\/strong>.<\/li>\n
        4. Press\u00a03<\/strong>\u00a0to select the wireless security (WSEC<\/strong>) type.<\/li>\n
        5. Use the green left and right arrows to toggle between\u00a0TKIP<\/strong>\u00a0and\u00a0CCMP<\/strong>.<\/li>\n
        6. Press\u00a0Next<\/strong>.<\/li>\n
        7. Enter the wireless password and press\u00a0\"\"<\/strong>.<\/li>\n
        8. The terminal will connect and set this network to default.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n<\/li>\n<\/ol>","url":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/e355-user-manual\/connect-the-e355-to-your-wireless-network","articleFields":{"description":"Connect your terminal to the internet so that it can communicate with the\u00a0Adyen payments platform and your own back end systems.","id":"24218235","type":"page","_expandable":{"operations":""},"status":"current","last_edit_on":"27-05-2019 11:03"},"algolia":{"url":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/e355-user-manual\/connect-the-e355-to-your-wireless-network","title":"Connect the e355 to your wireless network","content":"Steps\n\n\nPress both\u00a0 \u00a0and\u00a09 to enter the Admin menu.\n\n\nEnter the PIN code for the Admin menu\u00a0to unlock the device.\u00a0If you do not know this code, see our POS Troubleshooting section.\n\nNo admin PIN code is required if the terminal is not yet boarded.\n\n\nScroll through menus using the * and # buttons for scrolling up and down respectively.\n\n\n\nPress\u00a01. Network.\u00a0\n\n\nPress\u00a02.\u00a0Wi-Fi.\n\n\nPress\u00a02.\u00a0Networks\n\n\nYou can either scan for a network, or manually add it:\n\n\nPress\u00a01. Scan\u00a0to scan for a network.\n\nWhen scanning, the terminal shows the message \"Scanning network\", while it looks for a network.\n\n\n\nChoose the desired network and enter the wireless password.\u00a0\nThe terminal will connect to the network.\n\n\nThe terminal sets the network as default automatically, and connects to it.\n\n\nExit the network menu to begin boarding the device.\n\n\n\n\nOr press\u00a02. Add\u00a0to manually add a network.\n\nEnter the network name in the\u00a01. SSID\u00a0field and press\u00a0.\nPress\u00a02\u00a0to select the authentication type (Auth).\nUse the green left and right arrows on the screen to toggle between\u00a0WPA\u00a0and\u00a0WPA-2.\nPress\u00a03\u00a0to select the wireless security (WSEC) type.\nUse the green left and right arrows to toggle between\u00a0TKIP\u00a0and\u00a0CCMP.\nPress\u00a0Next.\nEnter the wireless password and press\u00a0.\nThe terminal will connect and set this network to default.\n\n\n\n\n","type":"page","locale":"pt","boost":15,"hierarchy":{"lvl0":"Home","lvl1":"Terminais","lvl2":"Get started manuals","lvl3":"Deprecation of eVo terminals","lvl4":"e355 user manual","lvl5":"Connect the e355 to your wireless network"},"hierarchy_url":{"lvl0":"https:\/\/docs.adyen.com\/pt","lvl1":"https:\/\/docs.adyen.com\/pt\/point-of-sale","lvl2":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals","lvl3":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation","lvl4":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/e355-user-manual","lvl5":"\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/e355-user-manual\/connect-the-e355-to-your-wireless-network"},"levels":6,"category":"In-person payments","category_color":"green","tags":["Connect","wireless","network"]}}