{"title":"Connect the VX690 to your wireless network","category":"default","creationDate":1776961627,"content":"

Connect your terminal to the internet so that it can communicate with the plataforma de pagamentos da Adyen and your own back end systems.<\/p>\n

Steps<\/h2>\n
    \n
  1. \n

    Ensure the VX690 is fully charged and turned on.<\/p>\n<\/li>\n

  2. \n

    Press 9<\/strong> + \"\"<\/strong>.<\/p>\n<\/li>\n

  3. \n

    Enter the PIN code for the Admin menu. If you do not know this code, see our POS Troubleshooting section<\/a>.<\/p>\n

  4. \n

    Press 1. Network<\/strong>.<\/p>\n<\/li>\n

  5. \n

    Press 2. Wi-Fi<\/strong>.<\/p>\n<\/li>\n

  6. \n

    Press 2. Networks<\/strong><\/p>\n<\/li>\n

  7. \n

    You can either scan for a network, or manually add it:<\/p>\n

      \n
    1. \n

      Press 1. Scan<\/strong> to scan for a network.<\/p>\n

      \n

      When scanning, the terminal displays the message \"Scanning network<\/strong>\", while it looks for a network.<\/p>\n<\/div><\/div>\n

        \n
      1. \n

        Choose the desired network and enter the wireless password.<\/p>\n

        The terminal will connect to the network.<\/p>\n<\/li>\n

      2. \n

        The terminal sets the network as default automatically, and connects to it.<\/p>\n<\/li>\n

      3. \n

        Exit the network menu to begin boarding the device.<\/p>\n<\/li>\n<\/ol>\n<\/li>\n

      4. \n

        Or press 2. Add<\/strong> to manually add a network.<\/p>\n

          \n
        1. Enter the network name in the 1. SSID<\/strong> field and press \"\"<\/strong>.<\/li>\n
        2. Press 2<\/strong> to select the authentication type (Auth<\/strong>).<\/li>\n
        3. Use the green left and right arrows on the screen to toggle between WPA<\/strong> and WPA-2<\/strong>.<\/li>\n
        4. Press 3<\/strong> to select the wireless security (WSEC<\/strong>) type.<\/li>\n
        5. Use the green left and right arrows to toggle between TKIP<\/strong> and CCMP<\/strong>.<\/li>\n
        6. Press Next<\/strong>.<\/li>\n
        7. Enter the wireless password and press \"\"<\/strong>.<\/li>\n
        8. The terminal will connect and set this network to default.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n<\/li>\n<\/ol>","url":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/vx690-user-manual\/connect-the-vx690-to-your-wireless-network","articleFields":{"feedback_component":true,"id":"24218397","type":"page","_expandable":{"operations":""},"status":"current","last_edit_on":"28-12-2021 13:13"},"algolia":{"url":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/vx690-user-manual\/connect-the-vx690-to-your-wireless-network","title":"Connect the VX690 to your wireless network","content":"Connect your terminal to the internet so that it can communicate with the plataforma de pagamentos da Adyen and your own back end systems.\nSteps\n\n\nEnsure the VX690 is fully charged and turned on.\n\n\nPress 9 + .\n\n\nEnter the PIN code for the Admin menu. If you do not know this code, see our POS Troubleshooting section.\n\nNo admin PIN code is required if the terminal is not yet boarded.\n\n\nScroll through menus using the * and # buttons for scrolling up and down respectively.\n\n\n\nPress 1. Network.\n\n\nPress 2. Wi-Fi.\n\n\nPress 2. Networks\n\n\nYou can either scan for a network, or manually add it:\n\n\nPress 1. Scan to scan for a network.\n\nWhen scanning, the terminal displays the message \"Scanning network\", while it looks for a network.\n\n\n\nChoose the desired network and enter the wireless password.\nThe terminal will connect to the network.\n\n\nThe terminal sets the network as default automatically, and connects to it.\n\n\nExit the network menu to begin boarding the device.\n\n\n\n\nOr press 2. Add to manually add a network.\n\nEnter the network name in the 1. SSID field and press .\nPress 2 to select the authentication type (Auth).\nUse the green left and right arrows on the screen to toggle between WPA and WPA-2.\nPress 3 to select the wireless security (WSEC) type.\nUse the green left and right arrows to toggle between TKIP and CCMP.\nPress Next.\nEnter the wireless password and press .\nThe terminal will connect and set this network to default.\n\n\n\n\n","type":"page","locale":"pt","boost":15,"hierarchy":{"lvl0":"Home","lvl1":"Terminais","lvl2":"Get started manuals","lvl3":"Deprecation of eVo terminals","lvl4":"VX690 user manual","lvl5":"Connect the VX690 to your wireless network"},"hierarchy_url":{"lvl0":"https:\/\/docs.adyen.com\/pt","lvl1":"https:\/\/docs.adyen.com\/pt\/point-of-sale","lvl2":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals","lvl3":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation","lvl4":"https:\/\/docs.adyen.com\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/vx690-user-manual","lvl5":"\/pt\/point-of-sale\/user-manuals\/terminal-deprecation\/vx690-user-manual\/connect-the-vx690-to-your-wireless-network"},"levels":6,"category":"In-person payments","category_color":"green","tags":["Connect","VX690","wireless","network"]}}