Admin menu functions - e355

Main menu

Menu Option
Description
1. Totals Print and reset totals.
2. Network

View connection status, scan for networks and perform diagnostics.

3. Installer Download and install firmware packages directly from the Adyen platform. The Installer runs at midnight and fetches updates to your PED's firmware. 
4. Merchant

Make maintenance calls, download, view and erase configurations.

5. Restart Restart the terminal software.
6. Reboot Turn off/Shut down the terminal.

1. Network menu

Menu option
Description
1. Connection Status View the name and connection status of the network connection.
2. Ethernet List ethernet network settings, such as IP address, gateway, netmask, DNS and MAC address.
2. Wifi View TCP/IP settings, WiFi settings, reset and reload WiFi connections.
1. Wifi Switch to turn on or off WiFi.
2. Networks Scan for networks and add networks manually.
3. TCP/IP Settings View IP address, MAC address as well as DHCP, gateway, netmask and DNS settings.
4. Wifi reset Erase the WiFi settings and reboot the terminal
5. Reload Wifi Reload the WiFi profile configured on the backend.
3. Bluetooth View Bluetooth settings, scan and pair bluetooth devices, and set the terminal as discoverable to other devices. (VX690 only)
1. Bluetooth Switch that allows you to turn on or off WiFi.
2. TCP/IP Settings View IP address, MAC address as well as DHCP, gateway, netmask and DNS settings.
3. Base station Pair the terminal with a bluetooth base station.
4. Scan/Discovery Scan for bluetooth devices or set the terminal as discoverable to bluetooth devices.
4. GPRS View terminal GPRS settings for a connection to a mobile network.
1. TCP/IP Settings View IP address, MAC address as well as DHCP, gateway, netmask and DNS settings.
2. GPRS settings View GPRS settings such as operator, Network, IMEI, signal, RSSI etc.
5. Diagnostics Perform diagnostic tests to test connection.
1. Ping Ping a specific host with a specified packet length.
2. Test PSP connection Perform a test to check connection to the PSP.

2. Installer menu

Menu Option
Description
1. View Release 

(Only available on standalone terminals)

Generate a receipt showing the total processed amount per currency per card type.

2. View Packages

(Only available on standalone terminals)

Reset the total amounts processed counter.
Do not forget to reset totals after your shift.

3. Update release Download the release.json file containing latest release information.
This will retrieve and install the release we have configured for you on the Adyen platform.
4. Run Installer Run the installer immediately, rather than waiting until midnight. On restart, the device begins installing from the installer framework.
5. Delete packages Delete all packages installed so all packages will be re-installed on the next run.
6. Delete single package Delete a single package installed so it will be re-installed on the next run. Use delete single package if there is an issue with the package that requires reinstallation.
6. Delete release

Remove the release pushed from the Customer Area and install a firmware default but will keep the terminal registered to your merchant account.

3. Merchant menu

Menu option
Description
1. Maintenance call Make a maintenance call to invoke terminal actions configured on the backend.
3. Download configuration 

Download a new merchant configuration. 
Do not execute this command unless instructed to do so by Adyen Support.

3. View configuration

Show the following information:

  • Firmware version the terminal is running
  • Merchant account the terminal is registered to
  • Additional details.
1. View settings View settings such as configuration version, IPP keys loaded, PAL URL, Sync URL, Config URL, Firmware URL, transaction amounts, printing settings, Timezone, MKE settings, Bypass PIN, Magstripe, ICC, MSR, CTLS Signature and CDA mode.
2. View firmware View version information, such as Bootstrap version, Application version, External printer settings, OS version, EOS version, Contact kernel version, Cardslot version, VSS version, CTLS modules installed.
3. View hardware View Terminal ID, Serial port, internal printer settings, and CIB version.
4. Erase configuration

Erase the configuration from the terminal.

This requires re-boarding the terminal to your merchant account)

4. Totals menu

Menu Option
Description
1. Print totals

(Only available on standalone terminals)

Generate a receipt showing the total processed amount per currency per card type.

2. Reset totals

(Only available on standalone terminals)

Reset the total amounts processed counter.
Do not forget to reset totals after your shift.

5. Transactions

View a list of all transactions

Questions

Can't find something you are looking for? Look at our FAQ for answers or send an email to support.