Connect the VX675 to your wireless network


  1. Ensure the VX675 is fully charged.
    To fully charge the Terminal, leave plugged into the powered USB cable until the LED indicator remains lit.
  2. Press  confirm  + 9  to open the admin menu.
  3. Enter the admin PIN code to unlock the device.

    No admin PIN code is required if the terminal is not yet boarded.

  4. If you do not know the code, contact the Adyen POS Support Team to obtain the specific admin PIN code for your device.

    Scroll through menus using the * and # buttons for scrolling up and down respectively.

  5. Press 1.Network

  6. Press 2. Wifi.
  7. Press 2. Networks
  8. Press 1. Scan to scan for a network or 2. Add to manually add a network.

    When scanning, the terminal displays the message "Scanning network", while it looks for a network.

  9. Choose the desired network and enter the wireless password. The terminal will connect to the network.

  10. The terminal sets the network as default automatically, and connects to it.
  11. Exit the network menu to begin boarding the device.


Can't find something you are looking for? Look at our FAQ for answers or send an email to support.