No momento, esta página não está disponível em português

Additional settings

Receive additional shopper and transaction information in standard webhooks.

You can optionally receive more information about a transaction in your standard webhooks. You receive this information as additionalData included in the webhook.

To enable receiving this additional information:

In your Customer Area, go to Developers > Webhooks.
From the list of webhooks, select the one to configure.
Select Edit webhook or the edit icon .
Some webhooks have optional additional settings. If available, under Additional Settings, select the checkboxes for the additional information to include in the webhook.
Select Save configuration.

You can receive the following information:

Setting	Description	Fields included in `additionalData`
Add Acquirer Result	Receive Adyen's standardized mapping of the acquirer results for AVS and CVC checks.	`referred` `authCode` `cvcResult` `avsResult`
Add Payment Account Reference	Receive the Payment Account Reference (PAR) to link transactions from the same account across wallets like `visa-applepay` and `visa`. To receive the PAR for point-of-sale transactions, this must also be enabled under Developers > Additional data.	`PaymentAccountReference`
Add Raw Acquirer Result	Receive the raw acquirer results for AVS and CVC checks.	`acquirerCode` `cvcResultRaw` `avsResultRaw` `refusalReasonRaw`
HMAC Key (HEX Encoded)	Use this to generate a new HMAC key for your webhook events. For more information on HMAC signatures, see Verify HMAC signatures .	`hmacSignatureKey`
Include ARN	Receive the Acquirer Reference Number (ARN) . This can be used for reconciliation if Adyen Acquiring is not used for settlement. The ARN is only returned in CAPTURE and REFUND webhook events.	`arn`
Include Acquirer Error Details	Receive the details of errors sent by the Acquirer .	`acquirerErrorCode`
Include Acquirer Reference	Receive the Acquirer Reference . This can be used for reconciliation when Adyen Acquiring is used for settlement.	`acquirerReference`
Include Alias Info	Receive the alias of the shopper's credit card number.	`alias` `aliasType`
Include Authorised Amount (dynamic zero auth)	Receive the value of the authorisation amount of a Zero-value auth .	`authorisedAmountValue` `authorisedAmountCurrency`
Include Bank Account Details	Receive details of the shopper's bank account.	`bankName` `bankAccountNumber` `bankLocationId` `bic` `countryCode` `iban` `ownerName`
Include Capture Delay Hours	Receive the number of hours remaining until the payment will be captured.	`captureDelayHours`
Include Card Bin	Receive the Bank Identification Number of a credit card.	`cardBin`
Include detailed Card Bin information	Receive information about card transactions, including zero value authorisations.	`cardBin` – The Bank Identification Number of a credit card `cardIssuingCurrency` – The currency in which the card is issued, if available `cardIssuingBank` – The issuing bank `cardPaymentMethod` – The card payment method (for example, Visa or Mastercard) `cardIssuingCountry` – The issuing country/region `fundingSource` – Information about the funding type of the card
Include Card Holder	Receive the name of the cardholder .	`cardHolderName`
Include card info for recurring contract webhook events	Receive the card information that is used to create a recurring contract.	`cardSummary` `cardBin` `expiryDate` `cardHolderName` `fundingSource`
Include the co-brand card information	Receive information about co-badged cards.	`coBrandedWith`
Include contactless wallet token information	Receive information about the digital wallet used, as well as the untokenised card summary. To receive the token variant for point-of-sale transactions, this must also be enabled under Developers > Additional data.	`tokenTxVariant` `untokenisedCardSummary`
Include Delivery Address	Receive the delivery address details of the shopper that were passed in the payment request.	`deliveryAddress.street` `deliveryAddress.houseNumberOrName` `deliveryAddress.city` `deliveryAddress.postalCode` `deliveryAddress.stateOrProvince` `deliveryAddress.country`
Include Device Type and Browser Information	Receive information about the type of device and browser used by the shopper.	`deviceType` `browserCode`
Include Extra Costs	Receive information about additional costs that have been charged. This only applies to Dragonpay payments.	`extraCostsValue` `extraCostsCurrency`
Include Funding Source	Receive additional information about the funding type when a card payment is made.	`fundingSource` Possible values: CHARGED CREDIT DEBIT PREPAID DEFFERED_DEBIT PREPAID_RELOADABLE PREPAID_NONRELOADABLE
Include Installments info	Receive the installment value for Mercado Pago payments.	`installments.value`
Include Issuer country/region	Receive the country/region where the card was issued. Format: the two-letter ISO-3166-1 alpha-2 country code. Exception: QZ (Kosovo).	`issuerCountry`
Include Metadata in payment webhook for 3D Secure payments (webhooks are not sent from Pal)	Receive the metadata that you sent sent in the payment request for the 3D Secure payment. Enabling this may cause a slight delay receiving webhooks.
Include notes in manual review webhooks	Receive the notes added during manual review .	`manualReviewNotes`
Include the originalReference for CHARGEBACK_REVERSED webhook events	For CHARGEBACK_REVERSED webhook events, receive the `pspReference` of the original payment.	no extra fields
Include PayPal Details	Receive the PayPal details of the shopper.	`paypalEmail` – The email address of the shopper's PayPal account `paypalPayerId` – The shopper's PayPal Payer ID `paypalPayerStatus` – Whether the shopper's account has been Verified by PayPal `paypalAddressStatus` – Whether the shopper's address has been Confirmed by PayPal `paypalProtectionEligibility` – Whether the payment is eligible for PayPal Seller Protection `paypalPayerResidenceCountry` – The shopper's country/region of residence
Include PayULatam Details	Receive the traceability code and the authorization code of the sale. This only applies if PayULatam Acquiring is used for settlement.	`payULatamTrazabilityCode` `authCode`
Include POS Details	Receive the tender reference of the transaction, and the POIID of the payment terminal that processed the payment. This information is useful for reconciling and refunding offline payments.	`tenderReference` `terminalId`
Include POS TerminalInfo	Receive the POIID of the payment terminal that processed the payment.	`terminalId`
Include Raw 3D Secure Details Result	Receive the 3D Secure authentication result.	`xid` – The transaction ID of the 3D Secure session. The value is Base64-encoded and is returned for transactions with a directoryResponse of N or Y. `cavv` – The Cardholder Authentication Verification Value (CAVV) for the 3D Secure authentication session, as a Base64-encoded 20-byte array. `eci` – The electronic commerce indicator (ECI). `cavvAlgorithm` – The CAVV algorithm used.
Include Raw 3D Secure Result	Receive the raw 3D Secure authentication result from the card issuer.	`threeDOfferedResponse` The raw enrollment result from the 3D Secure directory services of the card schemes. `threeDAuthenticatedResponse` Possible values: Y - Full Authentication. N - No Authentication. U - Authentication requests sent but is unable to be completed. A - Authentication request sent successfully but the cardholder could not be authenticated.
Include Real Time Account Updater status	Receive the status of the Real Time Account Updater response.	`realtimeAccountUpdaterStatus` Possible values: NoChange - The card details have not changed. CardChanged - The card number has changed. CardExpiryChanged - The card expiry has changed. CloseAccount - The card has closed. ContactCardAccountHolder - The card details have changed. Contact the cardholder for the updated details.
Include the acquirer, acquirer account, raw response and response code of the (retry) attempts	Receive information about the retries that Adyen is making.	`retry.attemptN.acquirer` `retry.attemptN.acquirerAccount` `retry.attemptN.responseCode` `retry.attemptN.rawResponse` Above, `N` is the sequence number of the retry attempt.
Include Risk Data	Receive the risk data that you submitted using `additionalData` . For more information on these fields, refer to Risk data fields .	`riskdata`
Include Risk Profile	Receive information on the Risk Profile applied to the transaction. For more information on Risk Profiles, see Create and use risk profiles .	`riskProfile`
Include Shopper Country/region	Receive the country/region of the shopper, as passed in the payment request. Format: the two-letter ISO-3166-1 alpha-2 country code. Exception: QZ (Kosovo). standard.	`shopperCountry`
Include Shopper Details	Receive the details of the shopper you submitted using `additionalData` .	`shopperEmail` `shopperReference` `shopperIp` `shopperName` `shopperStatement` `shopperLocale` `shopperTelephone` `shopperSocialSecurityNumber`
Include Shopper Interaction	Receive information on sales channel that processed the payment.	`shopperInteraction` Possible values: Ecommerce ContAuth POS Moto
Include SOAP Security Header	Enable this if your webhook server requires a SOAP security header.	no extra fields
Include Store	Receive the name of the store that submitted the payment.	`store`
Include Subvariant	Receive the variant of the payment method used. For more information, see Payment Method Variant.	`paymentMethodVariant`
Include 3D Secure Result	Receive information about 3D Secure .	`threeDOffered` – Whether 3D Secure was triggered for the payment. `threeDAuthenticated` – Whether 3D Secure authentication was completed for the payment. `liabilityShift` – Whether a liability shift was offered for the payment
Include Account Validation Flag	Receive information about whether the authorisation was made to validate the card, or to charge it.	`accountValidation` Possible values: true – The authorisation was made to validate the card. false – The authorisation was made to charge the card.
Include Avs Data/ Billing address	Receive the shopper's billing address.	`billingAddress.street` `billingAddress.houseNumberOrName` `billingAddress.city` `billingAddress.postalCode` `billingAddress.stateOrProvince` `billingAddress.country`

Example

The following example shows a standard webhook with Include capture delay hours and Include Alias Info enabled.

{
   "live":"false",
   "notificationItems":[
      {
         "NotificationRequestItem":{
            "additionalData":{
               "captureDelayHours":"72",
               "alias":"B181677540714335"
            },
            "amount":{
               "value":500,
               "currency":"EUR"
            },
            "pspReference":"9313547924770610",
            "eventCode":"AUTHORISATION",
            "eventDate":"2018-01-01T01:02:01.111+02:00",
            "merchantAccountCode":"YOUR_MERCHANT_ACCOUNT",
            "operations":[
               "CANCEL",
               "CAPTURE",
               "REFUND"
            ],
            "merchantReference":"YourMerchantReference1",
            "paymentMethod":"visa",
            "reason":"58747:1111:12/2012",
            "success":"true"
         }
      }
   ]
}